Pick the right type
Condenser mics capture detail and suit vocals/acoustic instruments. Dynamic mics reject room noise and suit loud sources. USB is plug-and-play; XLR needs an interface but scales better.
The right mic captures your voice and instruments cleanly, so mixing starts from a good recording instead of fighting a bad one.
For most bedroom producers, a large-diaphragm condenser USB mic (like the Audio-Technica AT2020USB+ or Rode NT-USB) is the practical first purchase — one cable, no interface needed, and solid vocal clarity. If you already own an audio interface, an XLR condenser like the AT2020 or Rode NT1 gives more headroom and upgrade flexibility.
Condenser mics capture detail and suit vocals/acoustic instruments. Dynamic mics reject room noise and suit loud sources. USB is plug-and-play; XLR needs an interface but scales better.
Cardioid is the default for close vocal work — it ignores what is behind the mic. Omni and figure-8 are for room or two-source recording.
A lower self-noise means less hiss in quiet recordings. Look for a low noise spec (under 20 dB) on condenser mics.
A bright mic suits thin voices; a darker mic tames harsh ones. There is no single best mic — only the best mic for your voice.
Use a stand and pop filter. Shock-mount stops desk and floor rumble reaching the mic.
Aim for peaks around -12 to -6 dBFS. Too hot clips; too quiet adds noise when you turn it up.
One to two fists from the mic, slightly off-axis, pop filter between you and the capsule.
Record facing into the room, not a wall — and a little soft treatment kills echo and boxy tone.

A dependable, natural condenser for vocals and acoustic work.
USB ease or XLR clarity — Rode covers both starting points well.
Rejects room noise brilliantly for untreated bedrooms — the SM7B/58 workhorse route.
Pros: detailed, bright, one-cable convenience. Cons: picks up room noise, needs a quiet space. Best for: vocals and acoustic instruments.
Pros: rejects room noise, tough, great on loud sources. Cons: less top-end sparkle. Best for: untreated rooms and louder singers.
USB condensers — genuine plug-and-play for the first vocal recording.
AT2020/AT2035, Rode NT1 — the long-term sweet spot.
Neumann/Shure SM7B territory — for when the mic becomes your signature.
Set the distance and pop filter so plosives do not clip.
Record peaks around -12 dBFS — clean, no clipping.
Listen in real time (direct monitoring) to catch rumble and room tone.
Keep the cleanest takes; noise and room tone are easiest fixed at source.
Only for XLR mics. USB mics plug straight into your laptop and are the simplest first purchase.
A dynamic mic is the safer choice in an untreated room because it picks up less echo and background noise.
For a bedroom producer, a large-diaphragm USB condenser around £100-150 is the best value for clean vocals without extra gear.